O2k-Main Unit
Description | The O2k-Main Unit is a component of the O2k-Core. The O2k-Main Unit consists of functionally defined, integral elements, the (O2k-Main Basic, O2k-Peltier Temperature Control, two O2k-Electromagnetic Stirrer Twin-Control units, two O2k-Amperometric OroboPOS Twin-Channels, O2k-Barometric Pressure Transducer), which cannot be obtained separately. |
---|---|
Product ID | 20000 |
Type | O2k-Core |
Link | O2k-Core |
Image |
The O2k-Main Unit consists of integral elements, which are not separately available: The query description has an empty condition.
O2k-Series
The O2k is continuously developed further to integrate various innovations. While all O2k instruments have the same high standard for measuring respiration, there are differences with respect to:
- Type of stoppers and chamber holders used
- Type of OroboPOS-Connector
- Availability of additional electronic channels for O2k-MultiSensor applications.
The Series of the O2k is specified as the capital letter in the serial number of the O2k, shown on the label on the rear of the O2k-Main Unit (MiPNet19.18A O2k-start). A serial number B-xxxx or C-xxxx denotes O2k-Series B or C, while G-xxxx denotes an O2k-Series G.
With DatLab operating connected to the O2k, the serial number of the O2k is displayed:
- in the right corner of the status line, besides the DatLab version number (bottom).
- in the window caption of the O2k-Control window [F7].
Support of O2k-Modules
The O2k (Series E) and higher support all modules. O2k (Series A-D) require the O2k-MultiSensor electronic upgrade. An exception is the application of an NO sensor in a single chamber of the O2k-series A to C.