From Bioblast
| Welcome to OroboroPedia | O2k-Info | O2k-Catalogue OROBOROS | O2k-Manual | O2k-Protocols | O2k-Publications | O2k-WorldWide |
| Description | The O2k-Assembly Kit is a component of the O2k-Core, consisting of 2 O2k-Chambers (Duran glass), 2 PVDF Stirrer-Bars, 2 PVDF or PEEK O2k-Stoppers, O2k-Chamber Holders OroboPOS-Holders and OroboPOS-Connectors, and cables (power supply, USB-connection). Several components of the O2k-Assembly Kit are included in the O2k-Service Box either for shipment or for storage. |
|---|---|
| Product ID | 20100 |
| Type | O2k-Core, Catalogue |
| Link | O2k-Core |
| Image |
The O2k-Assembly Kit consists of
| Title | Description | Product id | Product image |
|---|---|---|---|
| O2k-Catalogue: O2k-Assembly Kit\Cables | 21### O2k-Catalogue: O2k-Assembly Kit\Cables | 21### | 21### |
| O2k-Main Power Cable | O2k-Main Power Cable, either O2k-Main Power Cable\230 V\Europe, O2k-Main Power Cable\120 V\US-CA, or O2k-Main Power Cable\230 V\AU-NZ. O2k-Core: in O2k-Assembly Kit. | 21110 | |
| RS232-Cable | RS232-Cable for connecting the O2k-Main Unit to the PC or laptop with DatLab 4 installed. When using DatLab 5, this cable will be replaced by USB-Cable 2.0\Type A-B for O2k-Series E upwards. | 21210-01 | |
| USB-Cable 2.0\Type A-B | USB-Cable 2.0\Type A-B for connecting the O2k-Main Unit (O2k-Series E upwards) to the USB port of a PC or laptop. O2k-Core: in O2k-Assembly Kit. | 21230-01 | |
| O2k-Catalogue: O2k-Assembly Kit\Main Unit | 22### O2k-Catalogue: O2k-Assembly Kit\Main Unit | 22### | 22### |
| O2k-Chamber Holder | O2k-Chamber Holder (blue POM) for PVDF or PEEK stoppers, with O-ring\Viton\18x2 mm and V-ring\30-35-4.5 mm. After the O2k-Chamber is inserted into the copper block, the O2k-Chamber Holder is screwed on top of the chamber into the copper block to hold the chamber into a tight vertical position (O-ring) and prevent liquid to flow from the stainless steel housing into the space outside of the chamber (V-ring). O2k-Core: 2 in O2k-Assembly Kit, mounted on the O2k-Main Unit. | 22100-01 |  |
| O-ring\Viton\18x2 mm | O-ring\Viton\18x2 mm, mounted on the O2k-Chamber Holder. | 22120-01 |  |
| V-ring\30-35-4.5 mm | V-ring\30-35-4.5 mm, mounted on O2k-Chamber Holder. | 22130-01 |  |
| OroboPOS-Connector | OroboPOS-Connector, with male connection to OroboPOS sensor head (POS) and with cable and male plug fitting into O2k-Main Unit. O2k-Core: 2 in O2k-Assembly Kit, mounted on the OroboPOS-Holders at the O2k-Main Unit. | 22200-01 |  |
| OroboPOS-Holder | The OroboPOS-Holder (POS-Holder) is screwed into the copper block of the O2k-Main Unit, guiding the OroboPOS-Connector with the OroboPOS sensor head (POS) to the O2k-Chamber, and keeping the OroboPOS-Connector in a fixed position for sealing the O2k-Chamber with the OroboPOS-Seal Tip. In addition, the OroboPOS-Holder fixes the O2k-Chamber in an accurate rotational position by pressing against the angular cut of the glass chamber. O2k-Core: 2 in O2k-Assembly Kit, mounted on the O2k-Main Unit. | 22300-01 | |
| O2k-Window Frame | O2k-Window Frame: blue POM, with thread for fixation on the O2k-Main Unit, to be removed only for rare cleaning purposes and for front fixation of the Fluorescence-Control Unit, using the O2k-Window Tool. | 22400-01 |  |
| O2k-Window Tool | O2k-Window Tool for removing the blue O2k-Window Frame from the O2k-Main Unit, for rare cleaning purposes and for front fixation of the Fluorescence-Control Unit. | 22410-01 |  |
| O2k-Fuse Power Plug\M2.5 A\5x20 mm | O2k-Fuse Power Plug\M2.5 A\5x20 mm: Mounted on the socket for the O2k-Main Power Cable, at the rear panel of the O2k-Main Unit. | 22510-01 |  |
| O2k-Catalogue: O2k-Chamber and Stirrers | 23### O2k-Catalogue: O2k-Chamber and Stirrers | 23### | 23### |
| O2k-Chamber | O2k-Chamber: 16 mm inner diameter, Duran glass polished, with standard operation volume (V) of 2 cm3 (2 ml). O2k-Core: 2 in O2k-Assembly Kit. | 23100-01 |  |
| Stirrer-Bar\white PVDF\15x6 mm | Stirrer-Bar\white PVDF\15x6 mm, operated in the O2k-Chamber at constant stirring speed (standard is 750 rpm, or 12.5 Hz), to provide optimum mixing of the sample in the aqueous medium and ensure a stable signal of the polarographic oxygen sensor (OroboPOS) placed in a position of maximum current of the medium. O2k-Core: 2 in O2k-Assembly Kit. | 23210-01 |  |
| O2k-Catalogue: Stoppers\conical Shaft\central Port | 24### O2k-Catalogue: Stoppers\conical Shaft\central Port | 24### | 24### |
| Stopper\black PEEK\conical Shaft\central Port | Stopper\black PEEK\conical Shaft\central Port: with conical shaft and one central capillary (with PTFE, graphite, carbon fiber), Volume-Calibration Ring (A or B) for volume adjustment 1.5 to 3.2 ml; 2 mounted O-rings (O-ring\Viton\12x1 mm). The black PEEK stoppers are required for optical O2k-MultiSensor Modules (O2k-Fluorescence LED2-Module). | 24000-01 |  |
| Stopper\white PVDF\conical Shaft\central Port | Stopper\white PVDF\conical Shaft\central Port: for closing the O2k-Chamber, with one capillary and conical basis; including Volume-Calibration Ring (A or B) for volume adjustment (1.5 to 3.2 ml); 2 mounted O-rings (O-ring\Viton\12x1 mm). O2k-Core: 2 in O2k-Assembly Kit; alternatively, 2 black stoppers Stopper\black PEEK\conical Shaft\central Port. | 24100-01 |  |
| O-ring\Viton\12x1 mm | O-ring\Viton\12x1 mm, for PVDF or PEEK O2k-Stoppers, box of 4 as spares.
O2k-Core: 2 boxes (spares) in O2k-Assembly Kit; O2k-TPP+ and Ca2+ ISE-Module and O2k-NO Amp-Module: 2 boxes (spares). |
24310-01 |  |
| Cover-Slip | The perspex Cover-Slips should be placed on top of the O2k-Stoppers to minimize contamination and evaporation of liquid extruding from the capillary of the stopper. The Cover-Slips do not exert any direct effect on oxygen backdiffusion into the O2k-Chamber. O2k-Core: 2 in O2k-Assembly Kit. | 24410-01 | |
| Stopper-Spacer | Stopper-Spacer (or gas spacer) to set the O2k-Stopper into a standard position for a fixed gas phase above the aqueous phase in the O2k-Chamber, during air calibration or for injection of nitrogen, argon or oxygen into the gas phase. O2k-Core: in O2k-Assembly Kit. | 24420-01 |  |
| Syringe\60 ml\Gas-Injection | Syringe\60 ml\Gas-Injection, 60 ml, with spacer and stainless steel needle, flat tip, for gas injection into the O2k-Chamber. O2k-Core: in O2k-Assembly Kit. | 24430-01 |  |
