Template:Fluorescence dyes and settings
From Bioblast
Revision as of 10:24, 19 November 2021 by Schmitt Sabine (talk | contribs)
| Application | Sensor | Filter set | O2k output | Light intensity (Amp polarization voltage) | Gain | Comment |
|---|---|---|---|---|---|---|
| AmplexTM UltraRed | Fluorescence-Sensor Green or Smart Fluo-Sensor Green | AmR | Type II | 100 - 500 | 1000 | at c(AmR) = 10 µM |
| TMRM | Fluorescence-Sensor Green or Smart Fluo-Sensor Green | AmR | Type III | 100 - 500 | 1000 | at c(TMRM) = 2 µM |
| Safranin | Fluorescence-Sensor Blue or Smart Fluo-Sensor Blue | Saf | Type III | 100 - 250 | 1000 | at c(safranin) = 2 µM |
| Rhodamine 123 | Fluorescence-Sensor Blue or Smart Fluo-Sensor Blue | Saf | Type III | 100 - 250 | 1000 | at c(Rh123) = 1 µM |
| Magnesium Green™ | Fluorescence-Sensor Blue or Smart Fluo-Sensor Blue | MgG / CaG | Type I and II | 100 - 500 | 1000 | at c(Mg Green) = 2 µM |
| Calcium Green™ | Fluorescence-Sensor Blue or Smart Fluo-Sensor Blue | MgG / CaG | Type I | 300 - 500 | 1000 | at c(Ca Green) = 2 µM |
In the O2k-LED2-Module (Series D-G) polarization voltage is used, while in the O2k-Fluo Smart Module (Series H-I) fluorescence intensity. To use the same setting in the O2k-Fluo LED2-Module as in the O2k-Fluo Smart-Module use the following Excel sheet:
 Download the EXCEL calculation-sheet to adjust fluorescence intensity |
