Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "Description" with value "After selection of the Amperometric, Amp channel in the '''[[O2k configuration]]''', an Amperometric, Amp tab will appear in the '''O2k control''' [F7] window. Set the desired light intensity (0-1600) in the field ´Fluo intensity´ and the desired amplification of the signal (1-1000) in the field ´Gain for Fluo sensor´in the Amperometric, Amp window followed by a left-click '''Send to O2k'''. Switching off the [[Illumination on/off|illumination]] before each fluorometric measurement is routinely required.". Since there have been only a few results, also nearby values are displayed.

Showing below up to 2 results starting with #1.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

Property: Value:

List of results

Amperometric,Amp + (After selection of the Amperometric, Amp c … After selection of the Amperometric, Amp channel in the '''[[O2k configuration]]''', an Amperometric, Amp tab will appear in the '''O2k control''' [F7] window. Set the desired light intensity (0-1600) in the field ´Fluo intensity´ and the desired amplification of the signal (1-1000) in the field ´Gain for Fluo sensor´in the Amperometric, Amp window followed by a left-click '''Send to O2k'''. Switching off the [[Illumination on/off|illumination]] before each fluorometric measurement is routinely required.ometric measurement is routinely required.)

Amperometric,Amp +