Difference between revisions of "Layout for DatLab graphs"
From Bioblast
Line 9: | Line 9: | ||
}} | }} | ||
{{MitoPedia topics}} | {{MitoPedia topics}} | ||
== Layout: O2k-Core == | |||
Β | |||
:::: 1 Calibration show temp | |||
:::: 2a Calibration and background | |||
:::: 2b Calibration and background (high O2) | |||
:::: ---- | |||
:::: 3a Flux per volume | |||
:::: 3b Flux per volume (high O2) | |||
:::: 3c Flux per volume overlap | |||
:::: 3d Flux per volume overlap (high O2) | |||
:::: ---- | |||
:::: 4a Specific flux | |||
:::: 4b Specific flux (high O2) | |||
:::: 4c Specific flux overlap | |||
:::: 4d Specific flux overlap (high O2) | |||
:::: ---- | |||
:::: 5a Flux control ratio | |||
:::: 5b Flux control ratio (high O2) | |||
:::: 5c Flux control ratio overlap | |||
:::: 5d Flux control ratio overlap (high O2) | |||
:::: ---- | |||
:::: Raw signal |
Revision as of 14:39, 17 May 2016
Description
A Layout in DatLab is a predefined selection of Plots to be displayed at specific Scalings and in a specific order. Any defined graphics Layout can be selected from the Layout menu for defining initial settings for the Plots [Ctrl+F6] and Scaling [F6]. A Layout can be modified and saved under a specific name. In typical standard DatLab graph layouts plots are shown for the left chamber in Graph 1 (top), and for the right chamber in Graph 2 below). During data acquisition, a 30 min time range is frequently used and adjusted to 1 h during the experiment [F6].
Reference: MiPNet19.18C DatLab Guide
MitoPedia O2k and high-resolution respirometry:
DatLab
Layout: O2k-Core
- 1 Calibration show temp
- 2a Calibration and background
- 2b Calibration and background (high O2)
- ----
- 3a Flux per volume
- 3b Flux per volume (high O2)
- 3c Flux per volume overlap
- 3d Flux per volume overlap (high O2)
- ----
- 4a Specific flux
- 4b Specific flux (high O2)
- 4c Specific flux overlap
- 4d Specific flux overlap (high O2)
- ----
- 5a Flux control ratio
- 5b Flux control ratio (high O2)
- 5c Flux control ratio overlap
- 5d Flux control ratio overlap (high O2)
- ----
- Raw signal