From Bioblast
| Welcome to OroboroPedia | O2k-Info | O2k-Catalogue OROBOROS | O2k-Manual | O2k-Protocols | O2k-Publications | O2k-WorldWide |
O2k-Catalogue: Complete OROBOROS Product List Bioblast - wiki by OROBOROS INSTRUMENTS
- ID 1#### Oxygraph-2k - the modular system for high-resolution respirometry.
- ID 2#### O2k-Core / OroboPOS
- ID 3#### TIP2k
- ID 4#### O2k-MultiSensor
- ID 5#### Core-Accessories and Auxiliary HRR-Tools: Microsyringes / PBI-Shredder / Microbalance / Forceps
- Order information: @OROBOROS
O2k-Catalogue: Complete OROBOROS Product List - current and former series, all spares
| Title | Description | Product id | Product image |
|---|---|---|---|
| O2k-Catalogue: Contents and concept | O2k-Catalogue: Contents and concept | #####-## |  |
| O2k-Feedback | O2k-Feedback: OROBOROS - Cooperation and Feedback in Science | *****-++ |  |
| O2k versus multiwell respirometer | O2k stands for Oxygraph-2k and high-resolution respirometry, meeting powerful quality criteria thus securing high output. 'High throughput' stands for multiwell systems. In respirometry, this is not equivalent to high output. | *****--- |  |
| Oxygraph-2k | OROBOROS Oxygraph-2k (O2k) - the modular system for high-resolution respirometry (HRR). The O2k is the 2-chamber high-resolution respirometer for monitoring oxygen consumption with small amounts of biological samples. The modular O2k-concept yields a high flexibility for HRR, with the O2k-Core as the basis, and O2k-Modules supported by the O2k-Core. O2k-Modules are the Titration-Injection microPump (TIP2k-Module) and O2k-MultiSensor Modules (Fluorometry; Ion Selective Electrodes, ISE). | 1#### |  |
| O2k-Core | O2k-Core (OROBOROS Oxygraph-2k Core) - the experimental system complete for basic high-resolution respirometry (HRR). The O2k-Core includes the O2k-Main Unit with stainless steel housing, O2k-Assembly Kit, two OroboPOS (polarographic oxygen sensors) and OroboPOS-Service Kit, DatLab software, the ISS-Integrated Suction System and the Microsyringe-Core Set. The O2k-Core supports all add-on O2k-Modules of the Oxygraph-2k. | 10000-01 |  |
| TIP2k-Module | TIP2k-Module, Titration-Injection microPump (TIP2k) for two-channel operation with the O2k-Core with automatic control by DatLab of programmable titration regimes and feedback control (oxystat, pH-stat). The TIP2k-Module includes TIP2k-Accessories: 4 Microinjection syringes and 1 Pkg. TIP2k-Needle Spacers with mounting tool. | 11100-01 |  |
| O2k-Fluorescence LED2-Module | The O2k-Fluorescence LED2-Module is an amperometric add-on module to the O2k-Core, adding a new dimension to HRR. Optical sensors are inserted through the front window of the O2k-glass chambers, for measurement of hydrogen peroxide production (Amplex red), ATP production (Magnesium green), mt-membrane potential (Safranin), Ca2+ (Calcium green), and numerous other applications open for O2k-user innovation. The O2k-Fluorescence LED2-Module consists of optical sensors for both O2k-Chambers (LEDs for green and blue excitation), optical filters, Fluorescence-Control Unit for regulation of light intensity, data input into the O2k-Main Unit, and the updated DatLab software. | 12100-01 |  |
| O2k-TPP+ and Ca2+ ISE-Module | O2k-TPP+ and Ca2+ ISE-Module: 2 potentiometric ion-selective electrodes (ISE), ISE-Service Kit and 2 PVDF-Stoppers, supported by the O2k-Core. | 12300-01 |  |
| O2k-pH ISE-Module | O2k-pH ISE-Module: two pH electrodes and reference electrodes and accessories, two black PEEK stoppers, supported by the O2k-Core. | 12400-01 | |
| O2k-NO Amp-Module | O2k-NO Amp-Module: 2 PVDF stoppers for NO applications; 1 additional inlet (2.3 mm) for 2 mm shaft NO sensor; central titration port; conical bottom; with Volume-Calibration Rings (A and B); with 8 spare O-rings (O-ring\Viton\12x1 mm; two boxes). The NO sensor is not included. | 12500-01 |  |
| PBI-Shredder HRR-Set | PBI-Shredder HRR-Set: Auxiliary HRR-Tool for tissue homogenate preparation; the Shredder-Kit Box contains the heavy duty high torque SG3 driver with convertible handle, SG3 base with 3 position force setting lever (FSL), battery charger, two lithium ion batteries, Shredder-Tube Cap Tool. The PBI-Shredder HRR-Set includes the Shredder-Kit Box with 100 Shredder-Tubes, 100 Shredder-Tubes\Metal, a pair of sharp forceps for tissue dissection and a pair of scissors. OROBOROS INSTRUMENTS: world-wide distributor. | 13200-02 |  |
| Microbalance-Set | Microbalance-Set: Microbalance 120 g (41 g to 120 g; 0.01 mg / 0.1 mg display) with Microbalance-Transport Case; particularly for wet weight determination of permeabilized fibres. | 13300-01 | |
| HRR-Dissection Set | HRR-Dissection Set: for tissue preparation, set of 4 pairs of stainless steel, antimagnetic forceps and a pair of scissors. | 13400-01 |  |
| O2k-Main Unit | The O2k-Main Unit is a component of the O2k-Core. The O2k-Main Unit consists of functionally defined, integral elements, the (O2k-Main Basic, O2k-Peltier Temperature Control, two O2k-Electromagnetic Stirrer Control units, two O2k-Amperometric OroboPOS Channels, O2k-Barometric Pressure Transducer), which cannot be obtained separately. | 20000 | |
| O2k-Main Basic | The O2k-Main Basic is an integral element of the O2k-Main Unit. The Oxygraph-2k Main Basic has the following components:
|
20010 | |
| O2k-Peltier Temperature Control | O2k-Peltier Temperature Control: electronic thermostat controlling temperature for 2 O2k-Chambers in the range of 2 to 47 °C; ±0.001 °C. Continuous recording of the O2k-Copper Block temperature. Integral component of the O2k-Main Unit. | 20020 | |
| O2k-Electromagnetic Stirrer Twin-Control | O2k-Electromagnetic Stirrer Twin-Control for smooth rotation of the stirrer bars in the two O2k-Chambers; with slow-start function to prevent decoupling of the stirrer bar; regulated stirrer speed in the range of 100 to 800 rpm (decoupling may occur at higher stirrer speeds), independent for the two O2k-Chambers; automatic events sent to DatLab when the stirrer is switched on/off or when the rotation seed is changed by the experimenter. Integral component of the O2k-Main Unit. | 20030 | |
| O2k-Amperometric OroboPOS Twin-Channel | O2k-Amperometric OroboPOS Twin-Channel: Two-channel variable polarization voltage; current/voltage converter for the polarographic oxygen sensor (POS); amplifyer with digital gain settings (1x, 2x, 4x, 8x); A/D converter; output in the range -10 V to 10 V. Integral component of the O2k-Main Unit. | 20040 | |
| O2k-Barometric Pressure Transducer | O2k-Barometric Pressure Transducer, A/D converter and digital output to DatLab for continuous recording [kPa or mmHg], integrated into the air calibration of the OroboPOS (@O2k-Manual; @O2k-Protocols). Integral component of the O2k-Main Unit. | 20050 | |
| O2k-Assembly Kit | The O2k-Assembly Kit is a component of the O2k-Core, consisting of 2 O2k-Chambers (Duran glass), 2 PVDF Stirrer-Bars, 2 PVDF or PEEK O2k-Stoppers, O2k-Chamber Holders OroboPOS-Holders and OroboPOS-Connectors, and cables (power supply, USB-connection). Several components of the O2k-Assembly Kit are included in the O2k-Service Box either for shipment or for storage. | 20100 | |
| 2 OroboPOS | The 2 OroboPOS set (two polarographic oxygen sensors, POS) is included in the O2k-Core, shipped with the O2k in the O2k-Service Box. For details, see OroboPOS. | 20600 |  |
| OroboPOS-Service Kit | OroboPOS-Service_Kit, with O2k-Service Box including all oxygen sensor service accessories for membrane mounting and service of the OroboPOS. | 20610-01 |  |
| DatLab | DatLab is the O2k-Software for Data Acquisition & Analysis, specifically developed for high-resolution respirometry with the Oxygraph-2k. The newest DatLab version is included in the O2k-Core, and updates of DatLab are free of charge during the warranty period of the O2k. | 20700 | |
| ISS-Integrated Suction System | ISS-Integrated Suction System: Suction pump 230 or 120 V with stainless steel housing, 2 liter waste bottle, filter and tubing; for siphoning off excess medium from the O2k-Stopper and for emptying the O2k-Chambers. The ISS is included as a standard component of the O2k-Core. For specific country configurations, see Product ID 28101, 28102, 28103. | 20810 |  |
| Microsyringe-Core Set | The Microsyringe-Core Set consists of 6 10 µl, 6 25 µl, and 2 50 µl Hamilton glass syringes, and 3 spare plungers for the 10 µl syringes. It is a basic HRR-Accessory included in the O2k-Core Unit. | 20820-01 |  |
| O2k-Compendium | O2k-Compendium for high-resolution respirometry, including CD and USB-stick with DatLab, O2k-Manual, O2k-Protocols, O2k-Publications, and info on O2k-Workshops. The O2k-Compendium is a component of the O2k-Core. | 20900 |  |
| O2k-Catalogue: O2k-Assembly Kit\Cables | 21### O2k-Catalogue: O2k-Assembly Kit\Cables | 21### | 21### |
| O2k-Main Power Cable | O2k-Main Power Cable, either O2k-Main Power Cable\230 V\Europe, O2k-Main Power Cable\120 V\US-CA, or O2k-Main Power Cable\230 V\AU-NZ. O2k-Core: in O2k-Assembly Kit. | 21110 | |
| O2k-Main Power Cable\230 V\Europe | O2k-Main Power Cable\230 V\Europe. An O2k-Main Power Cable is included in the O2k-Core Accessory Set. | 21111-01 | |
| O2k-Main Power Cable\120 V\US-CA | O2k-Main Power Cable\120 V\US-CA, USA and Canada (120 V). An O2k-Main Power Cable is included in the O2k-Core Accessory Set. | 21112-01 | |
| O2k-Main Power Cable\230 V\AU-NZ | O2k-Main Power Cable\AU-NZ, Australia and New Zealand (230 V). An O2k-Main Power Cable is included in the O2k-Core Accessory Set. | 21113-01 | |
| RS232-Cable | RS232-Cable for connecting the O2k-Main Unit to the PC or laptop with DatLab 4 installed. When using DatLab 5, this cable will be replaced by USB-Cable 2.0\Type A-B for O2k-Series E upwards. | 21210-01 | |
| USB-RS232 Serial Adapter | USB-RS232 Serial Adapter, for connecting the RS232-Cable attached to the O2k-Main Unit (Series A-D) to the USB port of the PC or laptop. This is not required for O2k-Series E, nor when using a PC or laptop with a serial RS232 port. | 21220-00 | |
| USB-Cable 2.0\Type A-B | USB-Cable 2.0\Type A-B for connecting the O2k-Main Unit (O2k-Series E upwards) to the USB port of a PC or laptop. O2k-Core: in O2k-Assembly Kit. | 21230-01 | |
| O2k-Catalogue: O2k-Assembly Kit\Main Unit | 22### O2k-Catalogue: O2k-Assembly Kit\Main Unit | 22### | 22### |
| O2k-Chamber Holder | O2k-Chamber Holder (blue POM) for PVDF or PEEK stoppers, with O-ring\Viton\18x2 mm and V-ring\30-35-4.5 mm. After the O2k-Chamber is inserted into the copper block, the O2k-Chamber Holder is screwed on top of the chamber into the copper block to hold the chamber into a tight vertical position (O-ring) and prevent liquid to flow from the stainless steel housing into the space outside of the chamber (V-ring). O2k-Core: 2 in O2k-Assembly Kit, mounted on the O2k-Main Unit. | 22100-01 |  |
| O-ring\Viton\18x2 mm | O-ring\Viton\18x2 mm, mounted on the O2k-Chamber Holder. | 22120-01 |  |
| V-ring\30-35-4.5 mm | V-ring\30-35-4.5 mm, mounted on O2k-Chamber Holder. | 22130-01 |  |
| OroboPOS-Connector | OroboPOS-Connector, with male connection to OroboPOS sensor head (POS) and with cable and male plug fitting into O2k-Main Unit. O2k-Core: 2 in O2k-Assembly Kit, mounted on the OroboPOS-Holders at the O2k-Main Unit. | 22200-01 |  |
| OroboPOS-Holder | The OroboPOS-Holder (POS-Holder) is screwed into the copper block of the O2k-Main Unit, guiding the OroboPOS-Connector with the OroboPOS sensor head (POS) to the O2k-Chamber, and keeping the OroboPOS-Connector in a fixed position for sealing the O2k-Chamber with the OroboPOS-Seal Tip. In addition, the OroboPOS-Holder fixes the O2k-Chamber in an accurate rotational position by pressing against the angular cut of the glass chamber. O2k-Core: 2 in O2k-Assembly Kit, mounted on the O2k-Main Unit. | 22300-01 | |
| O2k-Window Frame | O2k-Window Frame: blue POM, with thread for fixation on the O2k-Main Unit, to be removed only for rare cleaning purposes and for front fixation of the Fluorescence-Control Unit, using the O2k-Window Tool. | 22400-01 |  |
| O2k-Window Tool | O2k-Window Tool for removing the blue O2k-Window Frame from the O2k-Main Unit, for rare cleaning purposes and for front fixation of the Fluorescence-Control Unit. | 22410-01 |  |
| O2k-Fuse Power Plug\M2.5 A\5x20 mm | O2k-Fuse Power Plug\M2.5 A\5x20 mm: Mounted on the socket for the O2k-Main Power Cable, at the rear panel of the O2k-Main Unit. | 22510-01 |  |
| O2k-Catalogue: O2k-Chamber and Stirrers | 23### O2k-Catalogue: O2k-Chamber and Stirrers | 23### | 23### |
| O2k-Chamber | O2k-Chamber: 16 mm inner diameter, Duran glass polished, with standard operation volume (V) of 2 cm3 (2 ml). O2k-Core: 2 in O2k-Assembly Kit. | 23100-01 |  |
| Stirrer-Bar\white PVDF\15x6 mm | Stirrer-Bar\white PVDF\15x6 mm, operated in the O2k-Chamber at constant stirring speed (standard is 750 rpm, or 12.5 Hz), to provide optimum mixing of the sample in the aqueous medium and ensure a stable signal of the polarographic oxygen sensor (OroboPOS) placed in a position of maximum current of the medium. O2k-Core: 2 in O2k-Assembly Kit. | 23210-01 |  |
| Stirrer-Bar\black PEEK\15x6 mm | Stirrer-Bar\black PEEK\15x6 mm, for specific applications with light guides to minimize optical interference. | 23220-01 | |
| O2k-Catalogue: Stoppers\conical Shaft\central Port | 24### O2k-Catalogue: Stoppers\conical Shaft\central Port | 24### | 24### |
| Stopper\black PEEK\conical Shaft\central Port | Stopper\black PEEK\conical Shaft\central Port: with conical shaft and one central capillary (with PTFE, graphite, carbon fiber), Volume-Calibration Ring (A or B) for volume adjustment 1.5 to 3.2 ml; 2 mounted O-rings (O-ring\Viton\12x1 mm). The black PEEK stoppers are required for optical O2k-MultiSensor Modules (O2k-Fluorescence LED2-Module). | 24000-01 |  |
| Stopper\white PVDF\conical Shaft\central Port | Stopper\white PVDF\conical Shaft\central Port: for closing the O2k-Chamber, with one capillary and conical basis; including Volume-Calibration Ring (A or B) for volume adjustment (1.5 to 3.2 ml); 2 mounted O-rings (O-ring\Viton\12x1 mm). O2k-Core: 2 in O2k-Assembly Kit; alternatively, 2 black stoppers Stopper\black PEEK\conical Shaft\central Port. | 24100-01 |  |
| Stopper-Shaft conical\white PVDF\central Port | Stopper-Shaft conical\white PVDF\central Port: PVDF shaft with one central capillary and conical base, receptacle on the top for collecting excess medium during closing the O2k-Chamber and during titration; component of Stopper\white PVDF\conical Shaft\central Port. | 24110-01 | |
| O-ring\Viton\12x1 mm | O-ring\Viton\12x1 mm, for PVDF or PEEK O2k-Stoppers, box of 4 as spares.
O2k-Core: 2 boxes (spares) in O2k-Assembly Kit; O2k-TPP+ and Ca2+ ISE-Module and O2k-NO Amp-Module: 2 boxes (spares). |
24310-01 |  |
| Volume-Calibration Ring | Volume-Calibration Ring (A or B) for PVDF or PEEK O2k-Stoppers, white; included in stoppers, e.g. Stopper\black PEEK\conical Shaft\central Port. | 2432A-01 or 2432B-01 |  |
| Cover-Slip | The perspex Cover-Slips should be placed on top of the O2k-Stoppers to minimize contamination and evaporation of liquid extruding from the capillary of the stopper. The Cover-Slips do not exert any direct effect on oxygen backdiffusion into the O2k-Chamber. O2k-Core: 2 in O2k-Assembly Kit. | 24410-01 | |
| Stopper-Spacer | Stopper-Spacer (or gas spacer) to set the O2k-Stopper into a standard position for a fixed gas phase above the aqueous phase in the O2k-Chamber, during air calibration or for injection of nitrogen, argon or oxygen into the gas phase. O2k-Core: in O2k-Assembly Kit. | 24420-01 |  |
| Syringe\60 ml\Gas-Injection | Syringe\60 ml\Gas-Injection, 60 ml, with spacer and stainless steel needle, flat tip, for gas injection into the O2k-Chamber. O2k-Core: in O2k-Assembly Kit. | 24430-01 |  |
| O2k-Catalogue: OroboPOS components | 26### O2k-Catalogue: OroboPOS components | 26### | 26### |
| OroboPOS | The OroboPOS is a polarographic oxygen sensor (POS), with an amperometric mode of operation. With application of a polarization voltage (0.6 to 0.8 V), a current is obtained as an amperometric signal, which is converted to a voltage. Shipment: OroboPOS are protected in a transparent perspex vial screwed onto a blue POM base, with the OroboPOS-Membrane Ring arrested on the POS shaft between the POM base and the thicker part of the POS head which holds a O-ring\Viton\8x1 mm. | 26000-01 |  |
| O2k-Service Box | O2k-Service Box empty, a component of the OroboPOS-Service Kit. | 26101-01 | |
| OroboPOS-Seal Tip | OroboPOS-Seal Tip, black butyl rubber gasket with 3 mm pore. 4/Pck, for sealing the OroboPOS (sensor head) against the O2k-Chamber. Push the wetted OroboPOS-Seal Tip over the POS-sensor head, with the pore positioned centrally, not covering any peripheral area of the gold cathode. Do not stretch the gasket across the POS-sensor head. O2k-Core: in OroboPOS-Service Kit. | 26110-01 |  |
| OroboPOS-Membrane Ring | OroboPOS-Membrane Ring, PEEK, holds the membrane against the inner O-ring on the POS housing. For shipment in the O2k-accessory box, the OroboPOS is enclosed in a perspex housing. When the POS is uncsrewed from the blue base of the housing, the OroboPOS-Membrane Ring slides out from the POS shaft, and can be put in place with the OroboPOS-Mounting Tool during membrane application. | 26120-01 |  |
| O-ring\Viton\8x1 mm | O-ring\Viton\8x1 mm: on OroboPOS sensor head. | 26130-01 | |
| O-ring\Viton\9x1 mm | O-ring\Viton\9x1 mm on OroboPOS-Mounting Tool. | 26131-01 |  |
| OroboPOS-Membranes | OroboPOS-Membranes, FEP 25 µm; 40/Pck. O2k-Core: 2 Pck in OroboPOS-Service Kit. | 26200-01 |  |
| OroboPOS-Electrolyte Powder | OroboPOS-Electrolyte Powder, KCl. O2k-Core: in OroboPOS-Service Kit. | 26300-01 |  |
| OroboPOS-Mounting Tool | OroboPOS-Mounting Tool for application of OroboPOS-Membranes, with O-ring\Viton\9x1 mm for holding the OroboPOS-Membrane Ring during membrane application. O2k-Core: in OroboPOS-Service Kit. | 26400-01 |  |
| OroboPOS-Polishing Cloth | OroboPOS-Polishing Cloth for cathode cleaning. O2k-Core: in OroboPOS-Service Kit. | 26510-01 |  |
| OroboPOS-Polishing Powder | OroboPOS-Polishing Powder for cathode cleaning. O2k-Core: in OroboPOS-Service Kit. | 26520-01 |  |
| Pen-Contact Oil | Pen-Contact Oil, for stable low contact resistance between the OroboPOS head and the OroboPOS-Connector. O2k-Core: in OroboPOS-Service Kit. | 26550-01 |  |
| O2-Zero Powder | O2-Zero Powder, dithionite (Na2S2O4), for zero-oxygen calibration of the OroboPOS. O2k-Core: in OroboPOS-Service Kit. | 26600-01 |  |
| Forceps for membrane application | Forceps for membrane application: for OroboPOS and ISE membrane application; do not use for tissue preparation. Set: in OroboPOS-Service Kit and O2k-TPP+ and Ca2+ ISE-Module. | 26700-01 |  |
| Pipette\Plastic\1 ml ungraded | Pipette\Plastic\1 ml ungraded, for filling electrolyte into the reservoir of the OroboPOS; in OroboPOS-Service Kit. | 26800-01 |  |
| O2k-Catalogue: DatLab Acquisition & Analysis Software | 27### O2k-Catalogue: DatLab Acquisition & Analysis Software | 27### | 27### |
| DatLab-Upgrading\4.1-4.3 | DatLab-Upgrading\4.1-4.3: Upgrading DatLab 4.1 to 4.3, incl. O2k-Manual, with free follow-up updates of DatLab 4.3. | 27141-43 | |
| O2k-Catalogue: O2k-Core Accessories | 28### O2k-Catalogue: O2k-Core Accessories: ISS-Integrated Suction System, Microsyringe-Core Set | 28### | 28### |
| ISS-Integrated Suction System\230 V\EU | ISS-Integrated Suction System\230 V\EU: Suction pump 230 V See: ISS-Integrated_Suction_System | 28101-01 | |
| ISS-Integrated Suction System\120 V\US-CA | ISS-Integrated Suction System\120 V\US-CA, suction pump 120 V (USA and Canada). See: ISS-Integrated_Suction_System | 28102-01 | |
| ISS-Integrated Suction System\230 V\AU-NZ | ISS-Integrated Suction System\230 V\AU-NZ, suction pump 230 V and plug for Australia and New Zealand. See ISS-Integrated Suction System. | 28103-01 | |
| ISS-Steel Housing | ISS-Steel Housing, a component of the ISS-Integrated Suction System. | 28110-01 | |
| ISS-Waste Bottle | ISS-Waste Bottle, 2-liter, component of the ISS-Integrated Suction System. | 28120-01 | |
| ISS-Lid | ISS-Lid, for ISS-Waste Bottle, component of the ISS-Integrated Suction System. | 28130-01 | |
| O2k-Catalogue: O2k-Compendium | 29### O2k-Catalogue: O2k-Compendium | 29### | 29### |
| O2k-Catalogue: TIP2k | 3#### O2k-Catalogue: TIP2k | 3#### | 3#### |
| Titration-Injection microPump | Titration-Injection microPump (TIP2k) for two-channel operation with the O2k-Core with automatic control by DatLab of programmable titration regimes and feedback control (oxystat, pH-stat). Included in the TIP2k-Module. | 31000-01 | |
| Electronic-TIP2k Upgrading\O2k-Main Unit Series A-D | Electronic-TIP2k Upgrading\O2k-Main Unit Series A-D: not required for O2k-Core, the O2k-Main Unit has to be returned to the OROBOROS workshop. | 31103-00 | |
| Electronic-TIP2k Upgrading\O2k-Main Unit Series E | Electronic-TIP2k Upgrading\O2k-Main Unit Series E: not required for O2k-Core, free of charge for Series E in conjunction with the purchase of the TIP2k-Module, the O2k-Main Unit has to be returned to the OROBOROS workshop. | 31104-00 | |
| Microsyringe\500 mm3\TIP2k | Microsyringe\500 mm3\TIP2k: Microinjection syringe for Titration-Injection microPump, 500 mm3, with spacers. Included in TIP2k-Module. | 31210-01 | |
| TIP2k-Needle Spacer | TIP2k-Needle Spacers for microinjection TIP2k needle, silicone stops (200/Pkg.) with mounting tool. Standard accessory of the TIP2k-Module. | 31310-01 |  |
| O2k-Catalogue: O2k-MultiSensor | 4#### O2k-Catalogue: O2k-MultiSensor. O2k-MultiSensor Modules can be obtained with the O2k-Core or added later, and can be simply installed by the user. | 4#### | 4#### |
| MultiSensor-Connector | MultiSensor-Connector: for separate reference electrode and ISE; only for O2k-Series B and Series C with MultiSensor electronic upgrading before 2011. | 40420-00 |  |
| MultiSensor-Preamplifier 1/100 | MultiSensor-Preamplifier 1/100: Required only for O2k-Series A-C, for application of NO sensors, or for the O2k-Fluorescence LED1-Module (single chamber mode of application). | 40430-00 |  |
| O2k-Catalogue: O2k-MultiSensor\General | 41### O2k-Catalogue: O2k-MultiSensor\General | 41### | 41### |
| Stopper-Shaft angular\white PVDF\side Port | Stopper-Shaft angular\white PVDF\side Port: angular base, for drilling additional custom-made ports for user-specified O2k-MultiSensor applications. | 41111-00 | |
| Stopper\black PEEK\conical Shaft\central+side 2.5 mm Port | Stopper\black PEEK\conical Shaft\central+side 2.5 mm Port, black PEEK (with PTFE, graphite, carbon fiber); 1 additional hole (2.5 mm); central titration port; conical bottom; including Volume-Calibration Ring (A or B); 2 mounted O-rings (O-ring\Viton\12x1 mm). | 41220-01 | |
| Stopper\white PVDF\angular Shaft\side+5 mm Port | Stopper\white PVDF\angular Shaft\side+5 mm Port: 1 additional hole (5 mm); side titration port; angular bottom; including Volume-Calibration Ring (A or B); 2 mounted O-rings (O-ring\Viton\12x1 mm). | 41252-01 | |
| Stopper\white PVDF\angual Shaft\side+6 mm Port | Stopper\white PVDF\angual Shaft\side+6 mm Port: 1 additional hole (6 mm); side titration port; angular bottom; including Volume-Calibration Ring (A or B); 2 mounted O-rings (O-ring\Viton\12x1 mm). | 41262-01 | |
| Stopper\white PVDF\conical Shaft\central+specified Ports | Stopper\white PVDF\conical Shaft\central+specified Ports: for O2k-MultiSensor applications with user-specific sensors; with additional holes custom-made, according to customer specification (max. 3.5 mm diameter); including Volume-Calibration Ring (A or B); 2 mounted O-rings (O-ring\Viton\12x1 mm). | 41312-01 | |
| Stopper\white PVDF\angular Shaft\side+specified Port | Stopper\white PVDF\angular Shaft\side+specified Port: with additional holes custom-made according to customer specification (max. 8 mm diameter); angular bottom; including Volume-Calibration Ring (A or B); 2 mounted O-rings (O-ring\Viton\12x1 mm). | 41314-01 | |
| O2k-Catalogue: TPP-Ca ISE-Module | 42### O2k-Catalogue: TPP-Ca ISE-Module | 42### | 42### |
| ISE-Service Box | ISE-Service Box: for storage and shipment of the O2k-TPP+ and Ca2+ ISE-Module or O2k-pH ISE-Module. | 42001-01 | |
| ISE Package 1 TPP or Ca | O2k-TPP+ and Ca2+ ISE\1 Chamber: ISE-Package for 1 TPP+ and Ca2+ electrode. | 42010-01 | |
| Stopper\white PVDF\angular Shaft\side+6.2+2.6 mm Port | Stopper\white PVDF\angular Shaft\side+6.2+2.6 mm Port, for application with ISE; side titration port and two additional holes (6.2 mm and 2.6 mm); angular bottom; including Volume-Calibration Ring (A or B); 2 mounted O-rings (O-ring\Viton\12x1 mm). 2 included in O2k-TPP+ and Ca2+ ISE-Module. | 42110-01 | |
| Stopper-Needle | Stopper-Needle: Short needle for bubble extrusion from port of the ISE-stopper. | 42120-01 | |
| Ion-Selective Electrode TPP+ and Ca2+ | Ion-Selective Electrode TPP+ and Ca2+: ISE with 6 mm outer diameter shaft, for Stopper\white PVDF\angular Shaft\side+6.2+2.6 mm Port. O2k-TPP+ and Ca2+ ISE-Module: 2 ISE. | 42200-01 | |
| ISE-Inner Glass Electrode | ISE-Inner Glass Electrode of ISE, with Ag/AgCl- and Pt-wire | 42212-01 | |
| ISE-Membrane Seal | ISE-Membrane Seal for Ion-Selective Electrode TPP+ and Ca2+. | 42213-01 | |
| ISE-Compressible Tube | ISE-Compressible Tube for Ion-Selective Electrode TPP+ and Ca2+. | 42214-01 | |
| ISE-Consumables Spares Set | ISE-Consumables Spares Set | 42250-01 | |
| ISE-TPP+ Membranes | ISE-TPP+ Membranes, PVC, 4 mm diameter, box of 5 membranes. O2k-TPP+ and Ca2+ ISE-Module: 2 boxes per electrode. | 42270-01 | |
| ISE-Ca2+ Membranes | ISE-Ca2+ Membranes: PVC, 4 mm diameter, box of 5 membranes. O2k-TPP+ and Ca2+ ISE-Module: 1 box included. | 42280-01 |  |
| ISE-Membrane Mounting Tool | ISE-Membrane Mounting Tool for Ion-Selective Electrode TPP+ and Ca2+. O2k-TPP+ and Ca2+ ISE-Module: mounting tool included. | 42300-01 | |
| ISE-Filling Syringe | ISE-Filling Syringe with needle for Ion-Selective Electrode TPP+ and Ca2+. | 42310-01 | |
| Reference-Electrode\2.4 mm | Reference-Electrode\2.4 mm: 2.4 mm diameter glass shaft, for ISE. | 42400-01 |  |
| Replacement-Barrel | Replacement-Barrel for Reference-Electrode\2.4 mm, 2.4 mm diameter glass. | 42401-01 |  |
| Electrolyte\Reference-Electrode | Electrolyte\Reference-Electrode for Reference-Electrode\2.4 mm | 42402-01 |  |
| O2k-Catalogue: pH-Electrode | 43### O2k-Catalogue: pH-Electrode | 43### | 43### |
| Stopper\black PEEK\conical Shaft\central+2.3+2.6 mm Port | Stopper\black PEEK\conical Shaft\central+2.3+2.6 mm Port: for pH and reference electrode, central titration port and two additional ports (2.3 mm and 2.6 mm); conical bottom; including Volume-Calibration Ring (A or B), 2 mounted O-rings (O-ring\Viton\12x1 mm). Two stoppers are included in the O2k-pH ISE-Module. | 43100-01 | |
| PH-Glass electrode | pH-Glass electrode with BNC plug. Two pH electrodes are included in the O2k-pH ISE-Module. | 43200-01 | |
| O2k-Catalogue: O2k-Fluorescence | 44### O2k-Catalogue: O2k-Fluorescence | 44### | 44### |
| Fluorescence-Service Box | Fluorescence-Service Box | 44001-01 |  |
| Fluorescence-Control Unit | Fluorescence-Control Unit with O2k-Front Fixation, Current-Control (O2k-Chamber A and B) for regulation of light intensity of the photodiodes in the fluorescence sensors. A component of the O2k-Fluorescence LED2-Module. | 44100-01 |  |
| Fluorescence-Sensor | Fluorescence-Sensor: LED with specified wavelength, photodiode, Filter-Cap attached with specific optical filter for the LED and/or photodiode. See Fluorescence-Sensor Green and Fluorescence-Sensor Blue. | 442## |  |
| Fluorescence-Sensor Green | Fluorescence-Sensor Green: excitation LED 525 nm (20 mA), photodiode, Filter-Cap equipped with Filter Set AmR for Amplex UltraRed measurements when delivered. | 44210-01 | |
| Fluorescence-Sensor Blue | Fluorescence-Sensor Blue: excitation LED 465 nm (20 mA), photodiode, Filter-Cap equipped with Filter Set Saf for measurement of mitochondrial membrane potential with Safranin when delivered. Filter sets for Magnesium green® / Calcium green® measurements are included. | 44220-01 | |
| Filter-Cap | Filter-Cap: Each Fluorescence-Sensor Green and Fluorescence-Sensor Blue is equipped with a removable Filter-Cap for exchange of optical filters, which is possible independently for optical pathways from the LED and to the photodiode. | 44310-01 |  |
| Filter Set AmR | Filter set AmR: Set of filters for the determination of H2O2 production with Amplex® UltraRed. These filters should be used together with Fluorescence-Sensor Green. The filter set consists of 6 LED filters (round, SG370) and 6 photodiode filters (rectangular, RL2001). One pair of these filters is attached to Fluorescence-Sensor Green when delivered as part of the O2k-Fluorescence LED2-Module. | 44321-01 | |
| Filter Set Saf | Filter set Saf: Set of filters for the (qualitative) determination of mitochondrial membrane potential with Safranin. These filters should be used together with Fluorescence-Sensor Blue. The filter set consists of 6 LED filters (round, SG357) and 6 photodiode filters (rectangular, SG19). One pair of these filters is attached to Fluorescence-Sensor Blue when delivered as part of the O2k-Fluorescence LED2-Module. | 44322-01 | |
| Filter Set MgG / CaG | Filter set MgG / CaG: Set of filters for the determination of concentraions of Mg2+ or Ca2+ with the fluorophores Magnesium green and Calcium green, respectively. These filters should be used together with Fluorescence-Sensor Blue. The filter set consists of 6 LED filters (round, SG59) and 6 photodiode filters (rectangular, RL21). | 44323-01 | |
| O2k-Catalogue: NO-Amp-Module | 46### O2k-Catalogue: NO-Amp-Module | 46### | 46### |
| Stopper\white PVDF\conical Shaft\central Port\peripheral 2.3 mm Port | Stopper\white PVDF\conical Shaft\central+peripheral 2.3 mm Port: for O2k-MultiSensor applications (NO); 1 additional port (2.3 mm); central titration port; conical bottom; including Volume-Calibration Ring (A or B); 2 mounted O-rings (O-ring\Viton\12x1 mm). O2k-MultiSensor: 2 in O2k-NO Amp-Module. | 46200-01 | |
| O2k-Catalogue: Core-Accessories and Auxiliary HRR-Tools | 5#### O2k-Catalogue: Core-Accessories and Auxiliary HRR-Tools | 5#### | 5#### |
| O2k-Catalogue: Microsyringes | 51### O2k-Catalogue: Microsyringes | 51### | 51### |
| Microsyringe\10 mm3 51/0.13 mm | Hamilton Microsyringe\10 mm3 51/0.13 mm for manual titrations, 10 mm3 volume; injection needle fixed: 51 mm length, 0.13 mm inner diameter. O2k-Core: 6 included in the Microsyringe-Core Set. | 51010-01 | |
| Plunger\10 mm3 | Plunger\10 mm3 for Microsyringe\10 mm3 51/0.13 mm, spare. O2k-Core: 3 in Microsyringe-Core Set. | 51011-01 | |
| Microsyringe\25 mm3 51/0.15 mm | Hamilton Microsyringe\25 mm3 51/0.15 mm for manual titrations, 25 mm3 volume; injection needle fixed: 51 mm length, 0.15 mm inner diameter. O2k-Core: 6 in Microsyringe-Core Set. | 51025-01 | |
| Plunger\25 mm3 | Plunger\25 mm3 for Microsyringe\25 mm3 51/0.15 mm, spare. | 51026-01 | |
| Microsyringe\50 mm3 51/0.15 mm | Hamilton Microsyringe\50 mm3 51/0.15 mm for manual titrations, 50 mm3 volume; injection needle fixed: 51 mm length, 0.15 mm inner diameter. O2k-Core: 2 in Microsyringe-Core Set. | 51050-01 | |
| Plunger\50 mm3 | Plunger\50 mm3 for Microsyringe\50 mm3 51/0.15 mm, spare. | 51051-01 | |
| Microsyringe\100 mm3 51/0.41 mm | Hamilton Microsyringe\100 mm3 51/0.41 mm for manual titrations, 100 mm3 volume; injection needle fixed: 51 mm length, 0.41 mm inner diameter. These syringes are not included in our standard set, but are recommended for injections of suspensions of isolated mitochondria. | 51100-01 | |
| O2k-Catalogue: PBI-Shredder | 52### O2k-Catalogue: PBI-Shredder | 52### | 52### |
| PBI-Shredder SG3 | PBI-Shredder SG3 for tissue homogenate preparation, heavy duty high torque SG3 driver with convertible handle, SG3 base with 3 position force setting lever (FSL), battery charger and two lithium ion batteries. The PBI-Shredder SG3 is included in the PBI-Shredder HRR-Set. Select 230 V or 120 V. OROBOROS INSTRUMENTS: world-wide distributor. | 52100 |  |
| Shredder-Kit Box | Shredder-Kit Box: box for storage and shipping, for PBI-Shredder SG3 | 52101-01 | |
| PBI-Shredder SG3\230 V | PBI-Shredder SG3\230 V | 52110-01 | |
| PBI-Shredder SG3\120 V | PBI-Shredder SG3\120 V | 52120-01 | |
| Shredder-Tube Cap Tool | Shredder-Tube Cap Tool: component of PBI-Shredder_HRR-Set. | 52130-01 |  |
| Shredder-Accessory Box | Shredder-Accessory Box: 71x335x240 mm inner dimensions, for storage and shipping of Shredder accessories. | 52201-01 | |
| Shredder-Tubes | Shredder-Tubes: consisting of Shredder Tube FT500-PS with Lysis Disk, serrated Shredder-Ram and Shredder-Screw Cap, coral colour (Box of 100). 1 box is included in the PBI-Shredder HRR-Set. | 52210-01 |  |
| Shredder-Tubes\Metal | Shredder-Tubes\Metal: consisting of Shredder Tube FT500-PMS with Metal Lysis Disk, serrated Shredder-Ram and Shredder-Screw Cap, coral colour (Box of 100). 1 box is included in the PBI-Shredder HRR-Set. | 52220-01 | |
| O2k-Catalogue: Microbalance Mettler-Toledo | 53### O2k-Catalogue: Microbalance Mettler-Toledo | 53### | 53### |
| Microbalance 120 g | Microbalance 41 g to 120 g; 0.01 mg / 0.1 mg display; particularly for wet weight determination of permeabilized fibres. | 53100-01 | |
| Microbalance 220 g | Microbalance 81 g to 220 g; 0.01 mg / 0.1 mg display; particularly for wet weight determination of permeabilized fibres. | 53200-01 | |
| Microbalance-Transport Case | Microbalance transport case. | 53300-01 | |
| O2k-Catalogue: HRR-Dissection Tools | 54### O2k-Catalogue: HRR-Dissection Tools | 54### | 54### |
| Forceps\stainless Steel\straight Tip\sharp | Forceps\stainless Steel\straight Tip\sharp: for tissue preparation, stainless steel, antimagnetic. One pair is recommended for insertion of the sample into the O2k-Chamber and for handling in combination with Forceps\stainless Steel\rounded Tip\sharp. Set: in HRR-Dissection Set and PBI-Shredder HRR-Set. | 54210-01 |  |
| Forceps\stainless Steel\rounded Tip\sharp | Forceps\stainless Steel\reounded Tip\sharp: for tissue preparation, stainless steel, antimagnetic. One pair is recommended for placing the tissue sample onto the microbalance and for handling in combination with Forceps\stainless Steel\straight Tip\sharp. Set: in HRR-Dissection Set. | 54220-01 |  |
| Forceps\stainless Steel\angular Tip\fine | Forceps\stainless Steel\angular Tip\fine: for tissue preparation, stainless steel, antimagnetic. Two pairs are used particularly for muscle fibre separation. Set: 2 in HRR-Dissection Set. | 54230-01 |  |
| Scissors\stainless steel\straight Tip\sharp | Scissors\stainless steel\straight Tip\sharp, included in PBI-Shredder HRR-Set and HRR-Dissection Set. | 54310-01 |  |
| O2k-Workshop\Registration waived | O2k-Workshop\Registration waived
|
70000 |  |
| O2k-Workshop\4 Days\Standard | O2k-Workshop\4 Days\Standard: introductory O2k-Workshop and training course (4 Days), standard registration. Module: A registration fee is waived in conjunction with the purchase of the O2k-Core (academic discount), valid during the O2k-Warranty Period. | 70004-01 | |
| O2k-Workshop\4 Days\Student | O2k-Workshop\4 Days\Student: introductory training course (4 Days), student registration. | 70004-02 | |
| Workshop 3 days Standard | O2k-Workshop (3 days), standard registration. | 71003-01 | |
| Workshop 3 days Student | O2k-Workshop (3 days), student registration. | 71003-02 | |
| Workshop 7 days Standard | Oxygraph-2k & O2k-MultiSensor Workshop (7 Days), standard registration; combined introductory and advanced O2k-MultiSensor Workshop. | 71007-01 | |
| Workshop 7 days Student | O2k-Basic & O2k-Multisensor-Workshop (7 Days), student registration; combined introductory and advanced O2k-MultiSensor Workshop. | 71007-02 | |
| Oxygraph-2k start-up service | Oxygraph-2k start-up service, O2k training course (3 days). In most cases, the O2k-Manual provides sufficient detail for setting up the O2k and starting measurements, particularly in conjunction with participation in an introductory O2k-Workshop. For specific requirements, however, a start-up visit by a scientific application specialist supports a highly efficient start of a project. | 72003-01 | |
| Oxygraph-2k scientific support service | Oxygraph-2k scientific support visit (4 days) by an O2k-application specialist provides scientific support in specific areas of applications, including help with sample preparation, design and testing of titration protocols (including SUIT protocols), and DatLab analysis. | 72004-01 | |
| Trolley | Aluminium trolley (700x500x60 mm); carrying capacity 120 kg; incl. packing box; for transport of O2k. | 80800-xx | |
| Packing | 99### Packing | 99### | 99### |
| Packing\O2k-Box 1+2 | Packing\O2k-Box 1+2 for shipping the O2k-Core. O2k-WorldWide delivery (DDU), insurance and handling are included in the O2k-Core. | 99000 | |
| Packing\O2k-Box 1 | Packing\O2k-Box 1: for shipment of the O2k-Main Unit, with polystyrene inlets. Keep the original packing material safely stored, for any future shipping purposes of the O2k-Main Unit. | 99010-01 | |
| Packing\O2k-Box 2 | Packing\O2k-Box 2, for shipment of accessories. | 99020-01 | |
| TIP2k and O2k-upgrade\B | TIP2k and O2k-Upgrade\B: Titration-Injection microPump TIP2k, including the electronic upgrade of the O2k-main unit returned to workshop (Series B-D). | Discontinued | |
| TIP2k cooling box | TIP2k-Cooling Box: Cooling box for TIP2k syringes. | Discontinued | |
| PH combination electrode 150/6 mm | pH combination electrode, 150 mm shaft, 6 mm diameter, incl. connection cable with BNC plug.
|
Discontinued | |
| TIP2k electronic upgrade | TIP2k-Electronic Upgrade, to add the Titration-Injection microPump TIP2k as a modular component at any time - standard component of the O2k-Core, discontinued as a separate optional component. | Discontinued | |
| PH combination electrode 70/5 mm | pH-Combination Electrode\70/5 mm, 70 mm shaft, 5 mm diameter, for 30251-24 stopper.
|
Discontinued |
